A warm bath at the end of the day is perfect to wash away all the stress from work. A water heater is an indispensable item in your home, especially in Dubai, where you need hot water for bathing, washing, and cooking. However, like all electrical appliances that have a high current rating, a water heater can also get damaged if it is not maintained properly.
In this blog, we will share some tips for water heater repair and maintenance in Dubai. We will also help you identify the common signs of a faulty water heater, troubleshoot some of the issues yourself, and know when to hire a professional for water heater repair services.
Table of Contents
Signs of a Faulty Water Heater (with DIY Solutions)
Regular Maintenance Tips for Water Heaters
Hiring a Professional Water Heater Repair Service
Signs of a Faulty Water Heater (with DIY Solutions)
How do you know if your water heater is malfunctioning? Here are some common signs:
- No hot water or not enough hot water: This could be due to a number of reasons, such as a tripped circuit breaker, a faulty thermostat, a broken heating element, or a gas supply issue.
DIY Fix:
If you have an electric water heater, check the circuit breaker and the high-temperature cutoff switch to see if they are tripped or blown. If they are, reset them and wait for the water to heat up. If they are not, test the thermostat and the heating elements. If they are faulty, replace them.
If you have a gas water heater, check the gas valve and the pilot light to see if they are on. If they are not, turn them on and relight the pilot light following the instructions on your water heater. If they are on, check the thermocouple and the gas control valve. If they are faulty, replace them.
- Leaking water: If you notice water dripping or pooling around the base of your water heater, it means that there is a leak somewhere in the tank or the pipes. A leak can also be a sign of corrosion or rust inside the tank.
DIY Fix:
If the leak is from the tank, you need to replace the entire water heater. If the leak is from the pipes, valves, or fittings, you may be able to tighten or replace them yourself using a wrench and some plumber’s tape.
- Strange noises: If you hear rumbling, popping, hissing, or whining noises coming from your water heater, it means that there is sediment buildup inside the tank. Sediment can also cause overheating and pressure buildup inside the tank, which can lead to explosions or fires.
DIY Fix:
To fix this, you need to drain and flush the tank as described above. You may also need to replace the heating elements if they are damaged by sediment.
- Discolored or smelly water: If your hot water looks rusty, cloudy, or has an unpleasant odor, it means that there is bacteria or corrosion inside the tank or the pipes. Discolored or smelly water can also indicate that your anode rod, which protects the tank from rusting, needs to be replaced.
DIY Fix:
To fix this, you need to drain and flush the tank. You may also need to replace the anode rod if it is worn out. You may also need to disinfect your water heater by adding some bleach to the tank and running hot water through all your faucets for a few minutes.
Regular Maintenance Tips for Water Heaters
- Check the temperature and pressure relief valve: Lift the lever on the TPR valve and let some water flow out of the discharge pipe. If no water comes out or if the valve leaks after closing it, you need to replace it.
- Drain and flush the tank: Turn off the power or gas supply to your water heater, attach a hose to the drain valve at the bottom of the tank, and run the hose to a drain or bucket. Open the drain valve and let all the water flow from the tank. Then close the drain valve and refill the tank with cold water. Repeat until the water becomes clear.
- Replace the anode rod: Turn off the power or gas supply to your water heater, drain some water from the tank using a hose attached to the drain valve, unscrew the anode rod from the top of the tank using a wrench, and pull it out. If it looks corroded or worn out, replace it with a new one of the same size and material. You should do this every 3 to 5 years or more often if you have hard water.
Hiring a Professional Water Heater Repair Service
While some water heater problems can be fixed by yourself, others require professional expertise and tools. You should hire a professional if:
- You are not comfortable or familiar with working with electricity or gas.
- You are not sure what is causing the water heater to not function properly.
- You have tried troubleshooting but the problem persists or worsens.
- You have a leak from the tank or a major component that needs replacement.
- You have an old or outdated water heater that needs upgrading
Conclusion
A professional water heater repair service can diagnose and fix any issues quickly and safely. They can also advise you on whether you need a new water heater or not, and help you choose and install one that suits your needs and budget.
So, if you’re looking for professionals, Fizfix guarantees quality workmanship, transparent pricing, and hassle-free service. You can also pay securely online using your credit card or cash on delivery. We also offer 24/7 customer support and a 30-day warranty on all services.
